| |
Full data collection inside CAD. |
| |
Reads/writes native .DWG format. |
| |
Plots points with symbols selected from symbol
library. |
| |
Plots linework. Field-to-finish is completed in
the field! |
| |
Does stakeout by point, station and offset, and
road template. |
| |
Works with all major brands of total stations and
GPS equipment. |
| |
See your points and linework as you data collect. |
| |
Ability to place text on your drawing and contour
in the field to verify that you have taken enough
points. |
| |
Field is designed for GIS work. It allows the
collection of data associated with valves,
manholes, power poles and other standard GIS
elements. It works with affordable, sub-meter
accuracy GPS systems from various manufacturers.
|
| |
|
|
|
| |
| |
Coordinate Systems
- Added support for Great Britain (OSGB-36),
Australia (GDA-MGA, AGD84-AMG, AGD84-ISG,
AGD66-AMG, AGD66-ISG), New Zealand (NZGD2000,
NZGD49), Puerto Rico State Plane 83 and France
(NTF-GR3DF97A). There is also a new user-defined
datum and projection method. The datum definition
consists of a Helmert 7-parameter datum shift with
lookup tables for ellipsoids and datum shift
values. The ellipsoid can also be user-defined.
The user-defined projection supports Transverse
Mercator, Lambert Conformal Conic 1 SP/2 SP,
Double Stereographic, Oblique Mercator and Oblique
Stereographic. |
| |
Geoid Support
- Added support for geoids of Great Britain
(OSGM02), Australia (GDA94) and Canada (CGG2000,
HT 2.0, HT 1.01). |
| |
Coordinate Order
- Added the option whether coordinates are
reported in northing-easting or easting-northing
order. |
| |
Align Local
Coordinates For two point
alignments, added the option for rotate-only where
the first control point is used for translation
and the second is used only for rotation. Added a
report function to make a report of the
localization control and GPS reference
coordinates. |
| |
Multiple
Measurements The same point
number can be measured multiple times and the
program will average the coordinates for the
point. Before accepting a new measurement, the
program reports the statistics on how the new
measurement effects the average. |
| |
Pitch Adjustment
For GPS, there is a new option to calculate the
pitch based on the path of GPS positions. This
pitch is then used to correct the position for
below the antenna in Auto Points At Interval,
Store Points, Track Position, Centerline Position
and Elevation Difference. This option applies when
mounting on a vehicle like an ATV. |
| |
Store Point
Added a toggle for No Elevation to create the
points at zero elevation. For GPS, there is a new
option to automatically start this routine in
continuous read mode. |
| |
Stakeout
The screen pick point option has been improved
to allow you to select from different snaps before
picking the point. |
| |
Field To Finish
Added support for user-defined special codes
such as start/stop and PC/PT. Also added support
for split multiple codes for linework. In Store
Point, there is a new toggle to Join linework to a
previous point. |
| |
Centerline Position
Added an option to use a profile to report
cut/fill. Also added an option to use an light bar
for guiding arrows based on left/right offset.
|
| |
Elevation Difference
Added the option to use road design and cross
section files to define the surface. These files
include centerline, profile, template, section,
superelevation and template transition. The
program will calculate the design elevation for
your current position from the road or section
files and report the cut/fill and station/offset.
|
| |
Point Check By
Robotic This is a new command to
automatically take a series of direct-reverse
shots to known coordinates and generate a report
of the difference between the known coordinates
and the coordinates calculated from the
measurements. |
| |
GPS Equipment Setup
A text file can be used for sending multiple
commands to the receiver. |
| |
Ashtech
- Added function to reset the RTK solution. Added
a configuration option for whether to enable the
receiver warning beep. |
| |
InnerSpace
Added support for the InnerSpace Tech depth
sounder. |
| |
Leica GPS
Added support for using cell phones for the RTK
messaging. |
| |
Sokkia Laser
Added support for the Sokkia Contour Laser. True
Field-to-Finish! |
| |
Create a new drawing or update existing drawings
directly in the field. |
| |
Stake points by point number or simply pick
endpoints or intersections of entities to
stakeout. |
| |
Cut & Fill automatically displayed for staked
points with elevation or along any TIN or Grid
terrain model. |
| |
Station and offset reporting instantly for GPS or
for Total Station stored points along any
centerline created and loaded in Carlson Survey. |
| |
Unlimited 6th field GIS smart prompting for direct
storage to a MDB database table, form or report. |
| |
Carlson Field, coupled with Carlson's GIS Module,
quickly becomes the true Data Link that Planning
and GIS professionals need and demand.
|
| |
Data Capture routines from SurvStar into AutoCAD
MAP using our GIS Plus software entirely automate
downloading, review/edit collected GIS info and
create or update MDB GIS database tables.
|
| |
All GIS point data is automatically drawn
layerized, with specific corner symbols, sized
with line work using Carlson Software's
Field-to-Finish routine. GIS point data is linked
to the database all in one step. |
| |
Carlson Field collects and stores points directly
in the AutoCAD DWG format. |
| |
Free Technical Support. |
